Services
PRÉ-COMMISSIONING
Willda Group Algérie can provide a large service that covers different industries such as Hydrocarbon, water treatment, cemeteries and power stations in EPC mode, revamping and corrective or preventive maintenance.
Flange management with Software application
Flange break register « FBR » :
- Controled Taighting
Bolt Tensioning up to 155 mm
- Bolt Torquing up to 72000 Nm/155 mm
Extracting, Cleaning, borescope Inspection and repairs of Heat Exchangers :
A heat exchanger is a device that transfers thermal energy from one fluid to another without mixing them.
In order to improve the reliability hence quality product, the exchanger must be maintained frequently.
On Site machining
Flange facing Horizontal and Circulars Modes
- Gas coolers plugs repairs
- Casing tube up to 22 Inches Diameter
INDUSTRIAL ON LINE LEAK SEALING
Air pressure cleaning
Sometimes using hydro jetting method is not appropriate for technical, economic or other environmental considerations, hence others alternatives can be used, such as.
Air drying
To avoid corrosion, any others deposits created inside the pipes or in other equipments after water usage such as Hydro test, Hydro cleaning or Chemical cleaning air drying operation is highly required
Valves maintenance
Willda Group Algérie can provide a 20ft containerized workshop that contains valve and safety valve test bench 700 bars air/ liquid pressure test monitored by software application for control and reporting.
Vacuum Send Removing from Cellar Wells, Manifolds, Surface Installation and CPF :
WILLDA GROUP ALGERIE can provide a 170 hp diesel vacuum truck capable of vacuuming dry, loaded and wet sand at 6m3/h, 50m distance from the cleaning area.